FiberMaxi F Series

High performance

Fiber Laser Technology

Call Now

0212 438 1626

0554 346 1178

https://www.almiratek.com/wp-content/uploads/2018/11/fibermaxi-f-icon.png

FiberMaxi F
Working Area 150 × 300 cm
500W Fiber Laser
1 kw Fiber Laser
2 kw Fiber Laser

https://www.almiratek.com/wp-content/uploads/2018/11/fibermaxi-g-icon.png

FiberMaxi G
Working Area 150 × 300 cm
500W Fiber Laser
1 kw Fiber Laser
2 kw Fiber Laser

Call Now

0212 438 1626

0554 346 1178

https://www.almiratek.com/wp-content/uploads/2018/11/fibermaxi-f-icon.png

FiberMaxi F
Working Area 150 × 300 cm
500W Fiber Laser
1 kw Fiber Laser
2 kw Fiber Laser

https://www.almiratek.com/wp-content/uploads/2018/11/fibermaxi-g-icon.png

FiberMaxi G
Working Area 150 × 300 cm
500W Fiber Laser
1 kw Fiber Laser
2 kw Fiber Laser

Control unit

Nesting : On the part plate, the materials to be cut are placed automatically with the fastest and least waste. The number of pieces and sheet size of the pieces are entered, after entering the space to be left between them, nesting process is started and the waste rate is minimized.

Flycut Thanks to this feature, cutting parallel segments in a series of ways saves a lot of time. Square, circle, pentagon all segments can be done in a serial format.

Combination: Allows you to cut two lines that are next to each other in a file as a single line, thus saving you considerable time and energy.

fibermaxi-ekran-dty
fibermaxi-ekran-dty
Control unit

Nesting : On the part plate, the materials to be cut are placed automatically with the fastest and least waste. The number of pieces and sheet size of the pieces are entered, after entering the space to be left between them, nesting process is started and the waste rate is minimized.

Flycut Thanks to this feature, cutting parallel segments in a series of ways saves a lot of time. Square, circle, pentagon all segments can be done in a serial format.

Combination: Allows you to cut two lines that are next to each other in a file as a single line, thus saving you considerable time and energy.

fibermaxi-rotary-dty
Pipe Cutting System

40 mm-120 mm pipe or profile cutting capacity. The largest 2.5m in one time can cut a total of 6m pipe. It is an optional system.

Moving Table

With the double table feature, you can collect the products you cut in the first table while you continue to work, and you save time by continuing your cutting work on the second table.

Engine

• 2 1500 watts Delta (Taiwan) Servo motors with long (Y) axis
• 1 x 1500 watt Delta (Taiwan) Servo motor with short (X) axis

Axis movements are made by rack system. Since there is no extra drive element between motor and pinion gear system, there is no deviation in the dimensions. High precision machined helical gears ensure 2G acceleration.

Cutting Head Specifications

R + Raytools (Switzerland) has automatic height detection and automatic lens movement. Adjusts automatic lens height according to material thickness, saves time during first drilling process. Only the thickness of the product to cut the operator remains to specify.

Precision

High-capacity distance sensor (100 microseconds loop) with the fluctuations in the material is not a problem.

Auto Focus

It is controlled by closed loop lens system and internal dynamic software. The focal length to be adjusted according to the thickness is registered in the system. No manual operation is required.

fibermaxi-kafa-dty
fibermaxi-kafa-dty
Cutting Head Specifications

R + Raytools (Switzerland) has automatic height detection and automatic lens movement. Adjusts automatic lens height according to material thickness, saves time during first drilling process. Only the thickness of the product to cut the operator remains to specify.

Precision

High-capacity distance sensor (100 microseconds loop) with the fluctuations in the material is not a problem.

Auto Focus

It is controlled by closed loop lens system and internal dynamic software. The focal length to be adjusted according to the thickness is registered in the system. No manual operation is required.

Promotional Videos

Promotional Videos

Let us call you

Call Now

0212 438 1626

0554 346 1178

Warranty

As Almira Technology, Aeon series has 2 years of electronic - mechanical spare parts and service guarantee.

  • In addition, the glass laser tubes that we use are given a one-to-one replacement guarantee against depletion due to use for 6 months.
  • The spare parts used in all machine models we sell as Almira Technology are universal; supply is quite easy.
  • Due to cracking of the tube due to the cooling of the cooler and collision with the hard object, etc. situations are not covered by the warranty.

Easy Payment Options

Payment by Credit Card

All bank credit cards with iyzico installment option.

Contribution Leased Leasing

With the cooperation of Almira Technology and Kuveyt Türk, you can benefit from laser cutting machines up to 12-48 months installment.

* Also Kosgeb, Anadolu Development Agency, State Materials Office, etc. we support our customers with the support of the institutions we sell machines in accordance with the agreements.

You may contact our sales representatives for Special Payment Options.

On-site Installation and Training

On-site technical service is provided for every machine you buy. During the warranty period, our technical team will be close to you as a telephone.

CONTACT

Almira Laser Machine Industry and Trade Limited Company
İkitelli OSB. Mah.
Bedrettin Dalan Bulvarı Metro 34 Plaza
No: 23, 11/12 Başakşehir / İstanbul
info@almiratek.com
0212-438-16-26

FOLLOW US ON SOCIAL MEDIA

en_USEnglish
tr_TRTurkish en_USEnglish